5 usb cable (dual port) with slot bracket, Figure 4-13: sata power drive connection – IEI Integration IMBA-Q454 v1.01 User Manual

Page 79

IMBA-Q454-R10 User Manual

Page 79

Figure 4-13: SATA Power Drive Connection

4.5.5 USB Cable (Dual Port) with Slot Bracket

The IMBA-Q454-R10 is shipped with a dual port USB 2.0 cable. To connect the USB

cable connector, please follow the steps below.

Step 1:

Locate the connectors. The locations of the USB connectors are shown in

Chapter 3.

WARNING:

If the USB pins are not properly aligned, the USB device can burn out.

Step 2:

Align the connectors. The cable has two connectors. Correctly align pin 1on

each cable connector with pin 1 on the IMBA-Q454-R10 USB connector.