Agilent Technologies Wireless Network Optimization Platform E6474A - Manual (Page 63)

Use Your System 4
Agilent E6474A User’s Guide 63
Starting the software
Detailed information about the software is available from the
online help. It is assumed that the software has already been
installed. If not, refer to
“Install the E6474A software" on
page 15 for installation instructions.
To start the software
1 To start the software, click Start > All Programs >
Agilent Wireless Solutions > E6474A- X > E6474A- X.
Refer to
Figure 31 .
Figure 31 Starting E6474A software
2 When the software starts, a copyright screen is briefly
displayed. This is followed by the welcome screen (Refer
to
Figure 31 on page 63).
Confirm your license options
Once the software has started, check your license options.
To check your license options.
1 With the application open, select Help > About E6474A...
2 Select the License Info... button.
A dialog box appears listing the detected license options. If
you do not see any license options in this dialog box, check
that you have a valid license key properly attached to your
system.