Agilent Technologies Wireless Network Optimization Platform E6474A - Manual (Page 28)

28 Agilent E6474A User’s Guide
3 Set Up Your System
Phones
Overview
The Agilent E6474A system supports a wide range of phones
and data communication devices. A list of the currently
supported phones can be found in the documentation
library. To access this list open the E6474A software and
select Help > Library.
Phones can be connected to your system using the following
methods:
Phone connection using a USB port
Most phones can be connected to your system using USB
interface cables.
The USB drivers used by these phones may require custom
installation processes. Follow the phone manufacturer’s
instructions for configuring USB phone connections. It is
recommended that you read the phone manufacturer’s
instruction before you connect any devices to your laptop.
Phone connection using direct serial (RS-232) port
Depending on the type of phone you wish to connect to your
laptop, it may be possible to connect the phone directly to
your laptop serial (RS- 232) port.
Refer to the phone manufacturer’s instructions before
connecting a phone.
NOTE
Phone battery charging and audio monitoring are not supported with direct
connect phones.