Agilent Technologies Wireless Network Optimization Platform E6474A - Manual (Page 100)

100 Agilent E6474A User’s Guide
4 Use Your System
Figure 77 Indoor floor plan loading dialog box
5 From the data items panel, drag and drop data items to
plot on the floor plan.
6 Configure the data items.
Once the map or floor plan has been loaded and data items
configured, you are ready to collect data.
How to collect indoor measurements
1 Zoom into the area where you are starting you indoor
data collection.
2 Select the Anchor icon and click on the floor plan you
current location.
3 Select the Log or Live mode buttons and wait a few
seconds for hardware to start reporting measurement
data.
4 Start walking to your next ‘way- point’.
5 Click on the map at you next ‘way- point’
6 Repeat this process until you have reach the end of your
data collection.
7 Select the Stop button. Refer to Figure 78 on page 101.