Agilent Technologies Wireless Network Optimization Platform E6474A - Manual (Page 181)

181
Agilent E6474A
User’s Guide
Agilent Technologies
D
Permanent In-Vehicle Hardware
Installation
In-Vehicle Installation Guidelines
Use the following guidelines when installing the system
hardware:
• The dimensions of the in- vehicle rack with the W1314A
installed are approximately:
• Width: 7 inches / 180mm
• Depth: 12 inches / 305mm
• Height: 1 ½ inches / 38mm
• If you are using a permanently installed cellular antenna,
follow the antenna manufacturer’s installation
instructions. Antennas should be spaced at least 18”
(45cm) apart to minimize interference.
WARNING
Before installing this product, check your vehicle warranty for any
special instructions regarding the installation of third party
products. Agilent assumes no responsibility for any vehicle warranty
issues arising out of the installation or use of this product.
It is recommended that any vehicle installation should be done by a
qualified vehicle mechanic and electrician.