Agilent Technologies Wireless Network Optimization Platform E6474A - Manual (Page 45)

Set Up Your System 3
Agilent E6474A User’s Guide 45
Charging the battery
The battery can be charged within the carry bag or in a
standalone docking station. Disconnect the charger from the
battery before checking the charge. The battery is fully
charged when all four LEDs are lit.
1 Connect the battery charger cable to the battery.
2 Plug the battery charger’s AC power cord into a 100- 240V
AC 50- 60Hz power source.
3 Allow approximately five hours to fully charge the battery.
Safe handling and disposal
For the safe use of lithium- ion batteries, always follow the
instructions provided below. Improper handling of
lithium- ion batteries may result in injury or damage from
electrolyte leakage, heating, ignition, or explosion. Batteries
must be recycled or disposed of properly.
NOTE
The battery is defined as a consumable part and is only covered by a 90
day warranty.