Anritsu 682XXB - Manual (Page 119)

5. Click on Communications.
6. At the Communications Dialog box, select the fol-
lowing options:
Baud Rate 9600 (See Note)
Data Bits 8
Stop Bits 1
Parity None
Flow Control Xon/Xoff
Connector Select connection made
during interconnection
682XXB/683XXB MM 4-9
CALIBRATION INITIAL SETUP
NOTE
When calibrating instruments with
operating firmware Version 2.00
and above (Version 1.00 and above
for 682X5B/683X5B models), set the
Baud rate to 19200.