Ransburg No. 2 Air Motor Atex Approved Unit 80086-XX - Manual (Page 29)

29 29 29 29 AH AH AH AH----12 12 12 12----01.03 No. 2 Air Motor Handgun 01.03 No. 2 Air Motor Handgun 01.03 No. 2 Air Motor Handgun 01.03 No. 2 Air Motor Handgun
No. 2 Handgun No. 2 Handgun No. 2 Handgun No. 2 Handgun
It is not advisable to soak the No. 2 Handgun in It is not advisable to soak the No. 2 Handgun in It is not advisable to soak the No. 2 Handgun in It is not advisable to soak the No. 2 Handgun in
solvent at any time. Most of the components of
solvent at any time. Most of the components of solvent at any time. Most of the components of solvent at any time. Most of the components of
the gun are designed to withstand exposure to
the gun are designed to withstand exposure to the gun are designed to withstand exposure to the gun are designed to withstand exposure to
many different solvents. There are components
many different solvents. There are components many different solvents. There are components many different solvents. There are components
within the gun that will not withstand solvent ex-
within the gun that will not withstand solvent ex- within the gun that will not withstand solvent ex- within the gun that will not withstand solvent ex-
posure and will be destroyed by such exposure.
posure and will be destroyed by such exposure. posure and will be destroyed by such exposure. posure and will be destroyed by such exposure.
This manual will advise when it is safe to clean
This manual will advise when it is safe to clean This manual will advise when it is safe to clean This manual will advise when it is safe to clean
components with solvent.
components with solvent. components with solvent. components with solvent.
W A R N I N G W A R N I N G W A R N I N G W A R N I N G
When working with any solvent, do it in a When working with any solvent, do it in a When working with any solvent, do it in a When working with any solvent, do it in a
well ventilated area away from any ignition
well ventilated area away from any ignition well ventilated area away from any ignition well ventilated area away from any ignition
sources. All heath and safety guidelines
sources. All heath and safety guidelines sources. All heath and safety guidelines sources. All heath and safety guidelines
recommended by the solvent manufactur-
recommended by the solvent manufactur- recommended by the solvent manufactur- recommended by the solvent manufactur-
er must be followed.
er must be followed. er must be followed. er must be followed.
W A R N I N G W A R N I N G W A R N I N G W A R N I N G
The gun assembly should never be soaked in The gun assembly should never be soaked in The gun assembly should never be soaked in The gun assembly should never be soaked in
solvent. If the gun is soaked in solvent, internal
solvent. If the gun is soaked in solvent, internal solvent. If the gun is soaked in solvent, internal solvent. If the gun is soaked in solvent, internal
components will be damaged. This could cause
components will be damaged. This could cause components will be damaged. This could cause components will be damaged. This could cause
injury to personnel and damage to equipment.
injury to personnel and damage to equipment. injury to personnel and damage to equipment. injury to personnel and damage to equipment.
SOAKING THE GUN ASSEMBLY IN SOLVENT
SOAKING THE GUN ASSEMBLY IN SOLVENT SOAKING THE GUN ASSEMBLY IN SOLVENT SOAKING THE GUN ASSEMBLY IN SOLVENT
WILL VOID WARRANTY.
WILL VOID WARRANTY. WILL VOID WARRANTY. WILL VOID WARRANTY.
Paint residue can be cleaned from the external Paint residue can be cleaned from the external Paint residue can be cleaned from the external Paint residue can be cleaned from the external
surfaces of the gun with nonpolar solvents and
surfaces of the gun with nonpolar solvents and surfaces of the gun with nonpolar solvents and surfaces of the gun with nonpolar solvents and
solvents that do not leave a conductive residue
solvents that do not leave a conductive residue solvents that do not leave a conductive residue solvents that do not leave a conductive residue
on the surfaces. Solvents safe for cleaning the
on the surfaces. Solvents safe for cleaning the on the surfaces. Solvents safe for cleaning the on the surfaces. Solvents safe for cleaning the
gun surface are the same as those listed in this
gun surface are the same as those listed in this gun surface are the same as those listed in this gun surface are the same as those listed in this
manual under "Effects of Solvents
manual under "Effects of Solvents manual under "Effects of Solvents manual under "Effects of Solvents ---- No. 2 Hand- No. 2 Hand- No. 2 Hand- No. 2 Hand-
gun Bells". If other solvents are required for gun Bells". If other solvents are required for gun Bells". If other solvents are required for gun Bells". If other solvents are required for
cleaning, then that cleaning should be followed
cleaning, then that cleaning should be followed cleaning, then that cleaning should be followed cleaning, then that cleaning should be followed
with the listed solvents.
with the listed solvents. with the listed solvents. with the listed solvents.
NOTES NOTES NOTES NOTES
MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE