Ransburg No. 2 Air Motor Atex Approved Unit 80086-XX User Manual

Page 10

AH----12

12----01.03 No. 2 Air Motor Handgun

01.03 No. 2 Air Motor Handgun

No. 2 Air Motor Handgun with

9050 Control Unit

9050 Control Unit —

—

—80086

80086

80086--

--XX

Marking Definitions

Ex Certificate Number: Sira 12ATEX5006X

Ex Certificate Number: Sira 12ATEX5006X

Sira = Notified Body performing EC

Sira = Notified Body performing EC

Sira = Notified Body performing EC----type exami-

type exami-

nation

12 = Year of certification

ATEX = Reference to ATEX Directive

5 = Protection Concept Code (code 5 is titled En-

5 = Protection Concept Code (code 5 is titled En-
capsulation)

capsulation)

006= Document serial number

X = Special conditions for safe use apply

Ex = Specific marking of explosive protection

II = Equipment Group hazardous area character-

II = Equipment Group hazardous area character-
istics

istics

2 = Equipment Category

2 = Equipment Category
Note: (2) indicates that the equipment can be

Note: (2) indicates that the equipment can be

Note: (2) indicates that the equipment can be
connected to Group 2 equipment although only

connected to Group 2 equipment although only

connected to Group 2 equipment although only
to be used/installed in a safe area only

to be used/installed in a safe area only

G = Type of explosive atmosphere (gases, va-

G = Type of explosive atmosphere (gases, va-
pors, or mists)

pors, or mists)

pors, or mists)

EEx 0.24mJ.

EEx 0.24mJ.

EEx 0.24mJ.–

–

–---- The No. 2 air motor handgun is

The No. 2 air motor handgun is

suitable for use in electrostatic spraying installa-

suitable for use in electrostatic spraying installa-
tions complying with EN 50 176 as they are a

tions complying with EN 50 176 as they are a

tions complying with EN 50 176 as they are a
Type A class with a discharge energy limit of

Type A class with a discharge energy limit of

Type A class with a discharge energy limit of
0.24mJ. The special conditions on the certificate

0.24mJ. The special conditions on the certificate

0.24mJ. The special conditions on the certificate
as noted by the “X” requires the end user locate

as noted by the “X” requires the end user locate

as noted by the “X” requires the end user locate
the 9060 Control unit outside the hazardous area

the 9060 Control unit outside the hazardous area

the 9060 Control unit outside the hazardous area
for safe usage.

for safe usage.

80083

80083----00 No. 2 Air Motor Label

00 No. 2 Air Motor Label

80082

80082----00 9060 Supply Label

00 9060 Supply Label

80108

80108----00 9060 Supply Label

00 9060 Supply Label

80088

80088----00 9060 Supply Label

00 9060 Supply Label

INTRODUCTION