Teledyne 6200A - Sulfides analyzer - Manual (Page 52)

TAI Model 6200A SO
2
Analyzer Operator Manual, 02164, Rev. G
3 SPECIFICATIONS, AGENCY APPROVALS,
WARRANTY
3.1 Specifications
Ranges In 1ppb increments from 50ppb to 20,000ppb, dual ranges or
autoranging
Noise at Zero 1 0.2 ppb RMS
Noise at Span 1 <0.5% of reading (above 50 ppb)
Lower Detectable Limit 2 0.4 ppb RMS
Zero Drift 3 <0.5 ppb/24 hours
Zero Drift 3 1 ppb/7 days
Span Drift 3 <0.5% FS/24hrs
Lag Time 20 sec
Rise Time 95% in <120 sec
Fall Time 95% in <100 sec
Sample Flow Rate 700cc/min. ±10%
Linearity 1% of full scale
Precision 0.5% of reading 1
Temperature Range 5-40 o C
Temp Coefficient < 0.1% per o C
Humidity 0 - 95% RH, non-condensing
Voltage Coefficient < 0.05% per V
Dimensions HxWxD 7"x17" x 23.6" (18cm x 43cm x 61cm)
Weight, Analyzer 45 lbs (20.5 kg) w/internal pump
Power, Analyzer 110v/60Hz, 220v/50Hz, 240v/50Hz, 250 watts
Power, Analyzer 4 230v/50Hz, 2.5A
Environmental Conditions Installation Category (Overvoltage Category) II
Pollution Degree 2
Recorder Output 5 0-100 mV, 0-1, 5, 10v ; resolution of 1 part in 1024 of selected
voltage or current range
Status Option 12 Status Outputs from opto-isolator
Measurement Units ppb, ppm, ug/m 3 , mg/m 3
1. As defined by USEPA.
2. Defined as twice the zero noise level.
3. At constant temperature and voltage.
4. Electrical ratings for CE Mark compliance
5. Bi-polar.
3-1