Teledyne 6200A - Sulfides analyzer - Manual (Page 154)

TAI Model 6200A SO
2
Analyzer Operator Manual, 02164, Rev. G
9.1.3 Fault Diagnosis using DIAGNOSTIC Mode
Diagnostic mode can be looked at as a tool kit of diagnostics to help troubleshoot the instrument.
To enter DIAG mode press:
SETUP-MORE-DIAG
The diagnostic modes are summarized in Table 9-3. To access these functions, after you have
pressed SETUP-MORE-DIAG, then press NEXT, PREV to select the desired mode then press
ENTR to select that mode. Table 9-3 below contains a summary of the diagnostic modes and
their operation. This section is a detailed description of the test and suggestions for its use.
9-11