GF Signet 8150 Battery-Powered Flow Totalizer - Manual (Page 12)

12 8150 Flow Totalizer
12. Timebase
Select the timebase for the fl ow rate. The available selections are seconds, minutes, hours or days.
Example: Change the Timebase from MINUTES (factory standard) to DAYS
1. Hold the ENTER key for 2 seconds, then enter the SECURITY CODE.
The display shows the fi rst item in the CALIBRATE menu, AutoCAL.
2. Press the ▼ key three times to scroll to the Timebase.
3. Press the ► key to select the Timebase for editing.
4. Press the ▲ key two time to scroll from MIN to DAY.
5. Press the ENTER key to return to the menu.
6. Press ▲ and ▼ keys together to exit the menu and return to normal operation.
The display shows "Storing" for a few seconds, then returns to the normal operating display.
1 2
3 4 5
6
3x
2x
2 s
Enter security code
*
**
**
*
Press the ▲ and ▼ keys simultaneously from
the main menu to return to normal operation. As long as any element is fl ashing, you can abort
the change and return to the original value by
pressing ▲ and ▼ keys simultaneously.
Exit Without Changing? * Finished Editing?
**