Burkert Type 8056 User Manual
Page 74

- 74 -
RS232_485_ETP_MODBUS_BU_REV02.doc
Bit 3 = min alarm delta T
Bit 4 = max alarm temp. T1
Bit 5 = min alarm temp. T1
Bit 6 = max alarm temp. T2
Bit 7 = min alarm temp. T2
(bit 8-15 not used, value = 0)
0025 Flags
ML212:
Bit 0 (LSB) = command error actuator
Bit 1 = deviation error
Bit 2 = Input error AIN1
Bit 3 = Input error AIN2
Bit 4 = manual regulation active
Bit 5 = safety mode active
(bit 6-15 not used, value = 0)
Data Logger values
Addresses(Hex format)
Description
0064-0077
Data block record n.1 of the Data logger
0078-008B
Data block record n.2 of the Data logger
… …
… …
… …
02D0-02E3
Data block record n.32 of the Data logger
In the following table there is the description of the structure of data of the first generation of the
Data Logger, the following records are the same but in different addresses respect the new
version.
Addresses(Hex format)
Description
0064-0065
Date and time of the record in second (long)
0066-0067
Totalizer value positive (long)
0068-0069
Totalizer value negative (long)
006A-006B
Flow rate in technical unit (float)
006C-006D
Energy value pos. (ML211) (long) / Input AIN1 (float)
006E-006F
Energy value neg. (ML211) (long) / Input AIN2 (float)
0070-0071
Thermal power in technical unit (ML211) (float)
0072-0073
Delta T value in technical unit (ML211) (float)
0074-0075
Temperature value T1 in technical unit (ML211)
(float)