Burkert Type 8056 - Manual (Page 50)

- 50 - RS232_485_ETP_MODBUS_BU_REV02.doc
Read command: DLGSI? Value of sample time interval if
accepted
1:CMD ERR if logging functions not
enabled
5:ACCESS ERR if insufficient access
level
Set command: DLGSI= n 0:OK if parameters accepted
1:CMD ERR if logging functions not
enabled
2:PARAM ERR if n out of range
5:ACCESS ERR if insufficient access
level
DLGSI (Data LoGger Sample
Interval) Reads or sets the sample
time interval at which the data are
collected.
Help command: DLGSI=?
List of num:description if accepted
1:CMD ERR if logging functions not
enabled
5:ACCESS ERR if insufficient access
level
Read command: DTIME?
Value of date and time if accepted
1:CMD ERR if logging functions not
enabled
5:ACCESS ERR if insufficient access
level
Set command:
DTIME=
tmstring
Value of current date and time
1:CMD ERR if logging functions not
enabled
5:ACCESS ERR if insufficient access
level
DTIME (Date / TIME) Reads or
sets the date and time value.
WARNING: when setting the
date and time, always check
the value returned because
malformed input string may
lead to incorrect time result.
Help command: DTIME=?
Format of the string to be input
1:CMD ERR if logging functions not
enabled
5:ACCESS ERR if insufficient access
level
Read number of records:
DLDRD?
Number of records in memory if
accepted
1:CMD ERR if logging functions not
enabled
Read record: DLDRD= n Record n in CSV format if accepted
1:CMD ERR if logging functions not
enabled
2:PARAM ERR if
n out of range
DLDRD (Data Logger static Data
ReaD) Reads the specified record,
the number of records saved in the
static data logger or the maximum
number of records that can be
saved in memory.
Read max. capacity:
DLDRD=?
Maximum range of n for the memory
in the format min <> max if
accepted
1:CMD ERR if logging functions not
enabled
Read command: NOT
SUPPORTED
1:CMD ERR if command is issued DLDRE (Data Logger static Data
REset) Resets the static data logger
and clears all records.
Set command: DLDRE=1 0:OK if parameters accepted
1:CMD ERR if logging functions not
enabled 2:PARAM ERR if n not equal
to 1
5:ACCESS ERR if insufficient access
level