Burkert Type 8056 - Manual (Page 36)

- 36 - RS232_485_ETP_MODBUS_BU_REV02.doc
Help command: A1SSV=?
min <> max (units) if accepted
1:CMD ERR if analog input 1 not
enabled
5:ACCESS ERR if insufficient access
level
Read command: A1FSV?
Full scale value of analog in.1 if
accepted
1:CMD ERR if analog input 1 not
enabled
5:ACCESS ERR if insufficient access
level
Set command: A1FSV= n
0:OK if parameters accepted
1:CMD ERR if analog input 1 not
enabled
2:PARAM ERR if n out of range
5:ACCESS ERR if insufficient access
level
A1FSV (Analog input 1 Full Scale
Value) Reads or sets the value of the
full scale point for the analog input 1.
Help command: A1FSV=?
min <> max (units) if accepted
1:CMD ERR if analog input 1 not
enabled
5:ACCESS ERR if insufficient access
level
COMMANDS AND FUNCTIONS EQUIVALENT TO THE “3-MEASURES” MENU
Name and description Modes Returned values or codes
Read command: MFTCV? Value of measure time constant if
accepted
5:ACCESS ERR if insufficient access
level
Set command: MFTCV= n 0:OK if parameters accepted
2:PARAM ERR if
n out of range
5:ACCESS ERR if insufficient access
level
MFTCV (Measure Filter Time
Constant Value) Reads or sets the
value of the measure filter time
constant.
Help command: MFTCV=? min <> max (units) if accepted
5:ACCESS ERR if insufficient access
level
Read command: MFSKT?
Value of measure skip threshold if
accepted
5:ACCESS ERR if insufficient access
level
Set command: MFSKT= n 0:OK if parameters accepted
2:PARAM ERR if
n out of range
5:ACCESS ERR if insufficient access
level
MFSKT (Measure Filter SKip
Threshold) Reads or sets the value
of the measure filter skip
threshold.
Help command: MFSKT=?
min <> max (units) if accepted
5:ACCESS ERR if insufficient access
level
Read command: MFMXT?
Value of max. variation threshold if
accepted
5:ACCESS ERR if insufficient access
level
MFMXT (Measure Filter MaX
variation Threshold) Reads or sets
the value of the measure filter
maximum variation threshold.
Set command: MFMXT= n 0:OK if parameters accepted
2:PARAM ERR if n out of range
5:ACCESS ERR if insufficient access
level