Burkert Type 8056 User Manual
Page 63
- 63 -
RS232_485_ETP_MODBUS_BU_REV02.doc
Help command: GPHTP=?
min <> max
if accepted
1:CMD ERR if GPRS not enabled
5:ACCESS ERR if insufficient access level
Read command: GPSMA?
IP address if command accepted
1:CMD ERR if GPRS not enabled
5:ACCESS ERR if insufficient access level
Set command:
GPSMA=
ip-range
0:OK if parameters accepted
1:CMD ERR if GPRS not enabled
2:PARAM ERR if
ip-range
malformed
5:ACCESS ERR if insufficient access level
GPSMA (GPrs SMtp Address) Reads
or sets the GPRS network SMTP
server address used to exchange the
email data. It must be specified in
the IP-range notation.
Help command: GPSMA=?
xxx.xxx.xxx.xxx
if accepted
1:CMD ERR if GPRS not enabled
5:ACCESS ERR if insufficient access level
Read command: GPHTA?
IP address if command accepted
1:CMD ERR if GPRS not enabled
5:ACCESS ERR if insufficient access level
Set command: GPHTA=
ip-
range
0:OK if parameters accepted
1:CMD ERR if GPRS not enabled
2:PARAM ERR if
ip-range
malformed
5:ACCESS ERR if insufficient access level
GPHTA (GPrs HTtp Address) Reads
or sets the GPRS network HTTP
server address used to exchange the
clock synchronization data. It must
be specified in the IP-range notation.
Help command: GPHTA=?
xxx.xxx.xxx.xxx
if accepted
1:CMD ERR if GPRS not enabled
5:ACCESS ERR if insufficient access level
Read command: GPSME?
Status of SMS functions if accepted
1:CMD ERR if RS232 port not enabled
5:ACCESS ERR if insufficient access level
Set command: GPSME=
n
0:OK if parameters accepted
1:CMD ERR if RS232 port not enabled
2:PARAM ERR if
n
out of range
5:ACCESS ERR if insufficient access level
GPSME (GPrs SMs Send Enable)
Enables or disables the functions
related to the SMS using the GPRS
terminal.
Help command: GPSME=?
List of
num:description
if accepted
1:CMD ERR if RS232 port not enabled
5:ACCESS ERR if insufficient access level
Read command: GPSSN?
Number set if accepted
1:CMD ERR if RS232 port not enabled
5:ACCESS ERR if insufficient access level
Set command: GPSSN =
n
0:OK if parameters accepted
1:CMD ERR if RS232 port not enabled
2:PARAM ERR if
n
out of range
5:ACCESS ERR if insufficient access level
GPSSN (Gprs Sms Send Number)
telephone number to sent the SMS
Help command: GPSSN =?
MAX 19 CHR STRING if accepted
1:CMD ERR if RS232 port not enabled
5:ACCESS ERR if insufficient access level