B&K Precision 5491B - Manual - Manual (Page 8)

8
Chapter 1 General Information
1.1 Feature Overview
The 2831E 4½ digit and 5491B 50,000 count multimeters provide measurements with high accuracy,
great stability and fast measurement rates. The meters provide a maximum measurement rate of 25
readings/sec and a 0.02% and 0.03% DC voltage basic accuracy for model 5491B and 2831E
respectively. Both meters have broad ranges that can measure:
 DC voltage up to 1000 V
 AC (RMS) voltage up to 750 V
 DC current up to 20 A
 AC (RMS) current up to 20 A
 Two -wire resistance up to 20
MΩ (50 MΩ for model 5491B)
 Frequency from 10 Hz to 1 MHz
Some additional capabilities:
 Full range of functions: In addition to those listed above, the meter functions include period, dB,
dBm, continuity, diode testing, max, min and percent.
Programming languages and remote control interfaces: The meters are programmable via USB
(Virtual COM) interface using SCPI commands
1.2 Incoming Inspection
Please inspect the instrument mechanically and electrically upon receiving it. Unpack all items from the
shipping carton, and check for any obvious signs of physical damage that may have occurred during
transportation. Report any damage to the shipping agent immediately. Save the original packing carton
for possible future reshipment. The following items are included with every order:
 Multimeter
 Test leads
 Power cord
 Spare fuse
 Operation Manual
 Calibration certificate and test report
Verify that all items above are included in the shipping container. If anything is missing, please contact
B&K Precision.