B&K Precision 5491B - Manual User Manual
Page 47

47
Table 6-1
DISPlay Subsystem Commands Summary
Command
Function Description
:DISPlay
:ENABle
:ENABle?
Enable or disable front panel display
Query state of the display
:ENABle
Command syntax:
:DISPlay:ENABle
Command Parameter:
=
0 or OFF
Disable front panel display
1 or ON
Enable front panel display
Query:
:ENABle? Query state of the display
Description:
This command is used to enable or disable front panel display circuitry. When disabled, the
instrument operates at a higher speed. While disabled, the display is frozen. All front panel controls
except LOCAL are disabled. Normal display operation can be resumed by using:ENABle command
or pressing LOCAL key to enable the display.
This manual is related to the following products: