Accessories, Supplied accessories, Optional accessories – Extron Electronics VN-MATRIX User Guide User Manual
Page 21

VN-MATRIX User Guide
Section 1: Introduction
I458GB issue 6
Page 21
Accessories
Supplied Accessories
In addition to this User Guide, the VN-MATRIX is supplied with the following accessories. If any of
these items is missing or damaged, please contact your Electrosonic dealer immediately:
Item
Qty
Re-order Code
12V Power Supply Unit (PSU)
1 ES3401-P
Mains Cord for PSU (with 3-pin ‘Edison’ plug)
For use in the USA.
1 CA4291
Mains Cord for PSU (bare-ended)
For use in Europe and all other countries.
1 CA429
Digital Monitor Cable (2 metre DVI-D to DVI-D)
1
Analog Monitor Cable (2 metre 15-pin HD-type to DVI-A)
1
DVI-A to 15-pin HD Adapter
1
Mouse/Keyboard Cable (2 metre PS/2 to PS/2)
2
Serial Cable (9-pin D-type to 9-pin D-type)
1
Digital Cable Kit:
ES3401-CD
Analog Cable Kit:
ES3401-CA
Optional Accessories
The following optional accessories are also available for use with the VN-MATRIX – these must be
ordered separately from your Electrosonic dealer:
Item
Order Code
Rack Mounting Kit (single unit)
A kit that allows a VN-MATRIX unit to be installed in a 19 inch equipment
rack. Full instructions are included with the kit.
ES3401-RM1
Rack Mounting Kit (dual unit)
A kit that allows two VN-MATRIX units to be installed, side by side, in a
19 inch equipment rack. Full instructions are included with the kit.
ES3401-RM2
Surface Mounting Kit
A kit that allows a VN-MATRIX unit to be mounted to any convenient flat
surface, e.g. under a desk. Full instructions are included with the kit.
ES3401-SM