Extron Electronics VN-MATRIX User Guide - Manual (Page 102)

Section 7: Technical Data VN-MATRIX User Guide
Page 102 I458GB issue 6
DVI Output (OUT)
Function: Loop-through video connection providing buffered output of the DVI IN
connector.
Connector Type: DVI-I (female).
Pin-out Details:
Digital Connections
Pin Function Pin Function Pin Function
1 TMDS 2- 9 TMDS 1- 17 TMDS 0-
2 TMDS 2+ 10 TMDS 1+ 18 TMDS 0+
3 Ground (2/4) 11 Ground (1/3) 19 Ground (0/5)
4 nc 12 nc 20 nc
5 nc 13 nc 21 nc
6 DDC Clock 14 +5V supply* 22 Ground (Clk)
7 DDC Data 15 Ground (for 5v) 23 TMDS Clock+
8 Analog V-Sync 16 Hot Plug Detect 24 TMDS Clock-
* 5V supply is provided by VN-MATRIX and limited by 200mA polyswitch.
All ground pins are linked internally.
Analog Connections
Pin Function
C1 Red Signal
C2 Green Signal
C3 Blue Signal
C4 Horizontal Sync
C5 Ground
Mating Connector: DVI-D or DVI-I (male).
Recommended Cable: Supplied DVI cables.
Maximum Cable Length: 2.95 metres (9.5 feet).
Signal Type: DVI (PanelLink® TMDS).
Pixel Clock (DVI
sources):
Up to 162MHz.
Analog Sources: VGA 640x480 @ 60,72,75,85Hz
SVGA 800x600 @ 56,60,72,75,85Hz
XGA 1024x768 @ 60,72,75,85Hz
1152x864 @ 75Hz
SXGA 1280x1024 @ 60,75,85Hz
UXGA 1600x1200 @ 60Hz
Color Depth: 24-bit maximum.
Scan Mode: Progressive.
DVI Standard: DVI 1.0
Display Data Channel
Standard:
DDC2B.
DDC Levels: V
IH
= 2.4V
V
OH
= 0.9V
I
LOADMAX
= 2mA
NOTE:
Analog Vertical Sync
is on pin 8.