Extron Electronics VN-MATRIX User Guide - Manual (Page 105)

VN-MATRIX User Guide Section 7: Technical Data
I458GB issue 6 Page 105
Serial Interface – Quick Reference
COM2 Port Settings
Baud rate: 115200
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
Login Procedure
From the Login: prompt, type config followed by the key.
When prompted for a password type config followed by the key.
The following menu will then appear.
Network Port 1 Network Port 2
============== ==============
1. Boot method: static [dhcp] 11. Boot method: static [dhcp]
2. address: 192.168.0.18 12. address: 192.168.1.18
3. netmask: 255.255.255.0 13. netmask: 255.255.255.0
4. gateway: 192.168.0.1
5. broadcast: 192.168.0.255 15. broadcast: 192.168.1.255
6. mtu: 1500 16. mtu: 1500
7. controller ip: 192.168.0.18
8. controller port: 5432 18. webserver port: 80
9. Exit
Type the menu option number required followed by the key.
Where required, type the new value followed by the key.
To exit the menu and return to the main command prompt type 9
Command Options
The following commands are also supported from the main command prompt:
Exit to logout from the session
Reboot to force the VN-MATRIX device to restart
Ping to test network communications with another device (see page 127).