Extron Electronics TLP 350MV User Guide - Manual (Page 8)

The Extron GUI Configurator software, which is used to design the graphical user interface,
allows the user to work with existing templates or create new interfaces on their PC. The
completed project is uploaded to the TouchLink Panel. The Extron Global Configurator
software is used to define the functions associated with the graphics created with
GUI Configurator, providing versatility and adaptability to the configuration and control of
an A/V system.
Features
3.5 inch full-color LCD screen — displays a range of customizable graphic objects and text
with a resolution of 320 x 240 pixels.
Touch screen overlay — provides simple and intuitive control over a range of functions by
touching the icons displayed on the screen.
Power over the Ethernet (PoE) — A twisted pair cable carries network information and
48 VDC from the power supply to the TLP 350MV.
GUI Configurator Software — allows the user to design a custom graphical user interface.
No programming knowledge is needed.
Global Configurator Software — defines the functions associated with the graphics
created with GUI Configurator.
Eight configurable backlit buttons — for common, user-defined functions. Pre-labeled
buttons are available.
Easy configuration and flexibility — the eight physical buttons and encoder knob, as
well as the on-screen graphics and text, can easily be changed or assigned new functions
to adapt the control panel to the evolving needs of the system, and avoid the need for
additional control modules.
Video source monitoring — for use as a preview, confidence monitor, or security camera
monitor to provide a visual full motion sample of any composite or S-video source.
Ethernet connection — provides an inexpensive, easily installed, cabling option for
connecting products located anywhere else on the network.
Compatible with most Extron IP Link products — easily integrated into existing systems.
Front panel encoder knob — primarily for volume control, but can be programmed for
other functions.
Light sensor — allows the auto dimming feature to adjust the LCD screen backlighting to
compensate for ambient lighting.
Motion sensor — When no motion is detected for a user-defined period of time, the unit
enters sleep mode to conserve power. When a user approaches the screen, the panel is
reactivated.
Loudspeaker — provides audible feedback in response to events triggered by the user.
Sleep mode — When no button presses or motion are detected for a user-defined period
of time, the unit enters sleep mode to conserve power. When a user touches the screen, or
movement is detected in front of the unit, the panel is reactivated.
TLP 350MV • Introduction 2