Extron Electronics TLP 350MV User Guide - Manual (Page 19)

If required, locate the Global Configurator program on the disc or web site and install that
also. By default, the Installer program creates and places the Global Configurator program in
the C:\Program Files\Extron\GCx.x folder, where x.x represents the version of
the Global Configurator program. During installation, there is an option to place an icon on
the Windows desktop.
Both programs can be downloaded from the Extron web site (
www.extron.com ). Select the
Download tab and click on the Software option in the sidebar at the left. Navigate to
GUI Configurator or Global Configurator and click Download next to the program. Follow
the on-screen instructions to complete installation. A folder is created on the C drive and an
icon may be placed on the desktop.
Using the TouchLink Panel Web Pages
The TLP 350MV TouchLink Panel has default web pages that can be used to read and
change the current settings of the panels. The web pages can be accessed as follows:
1. Open your browser and type the IP address of the TLP 350 unit into the address box.
The browser opens the TouchLink Panel Status page, which is read-only and provides
basic information about the model, date and time, and IP settings.
Figure 14. System Status Page
TLP 350MV • Configuration Software 13