beautypg.com

Reset modes, Reset, Modes – Extron Electronics TLP 350MV User Guide User Manual

Page 42

background image

Reset Modes

Occasionally, system conflicts make it necessary to reset firmware or IP settings. Extron
IP Link controllers have five reset modes, four of which are available for the TLP 350MV.
There is no mode 2 so that the numbering is consistent with the IP Link controllers.
The reset modes are:

z

z

Firmware (return to factory installed firmware — mode 1)

z

z

Events (turn events on or off — mode 3)

z

z

IP settings (mode 4)

z

z

Return to all factory defaults (mode 5)

The modes are initiated by pressing and holding down the Reset button for different
amounts of time. See the table on the next page for more information.
To access the Reset button on the TLP 350MV, remove the bezel as shown in

figure 3

. The

location of the buttons is shown in

figure 4

.

TLP 350MV • Reset Modes

36