Asus GigaX2124 - Manual (Page 99)

87
Chapter 5 - Command Line Interface
CLI Syntax: gvrp (enable | disable)
Example: (config)# gvrp enable
5.3.17.3 show gvrp configuration
Show gvrp configuration IFNAME status.
CLI Syntax: show gvrp interface [IFNAME]
Example: ASUS# show gvrp interface gi1/0/1
5.3.17.4 show gvrp statistics
Show gvrp statistics IFNAME status.
CLI Syntax: show gvrp statistics [IFNAME]
Example: ASUS# show gvrp statistics gi1/0/1
5.3.18 CoS/QoS
5.3.18.1 queue cos-map
Use the queue cos-map configuration command on the switch to set which
Cos queue a given priority should map into.
CLI Syntax: cos cos-map PRIORITY QUEUE
Example: (config)# cos cos-map 3 3
5.3.18.2 show queue cos-map
This command shows Cos queue and priority mapping information.
CLI Syntax: show cos cos-map
Example: ASUS# show cos cos-map
5.3.18.3 cos policy
This command sets cos policy for processing incoming packets.
CLI Syntax: cos policy (fifo | strict | wrr-queue)
Example: (config)# cos policy fifo