Asus GigaX2124 - Manual (Page 107)

95
Chapter 5 - Command Line Interface
This command used to show NTP server information.
CLI Syntax: show ntp server
Example: ASUS# show ntp server
5.3.26.4 show clock
This command used to show the switch clock time.
CLI Syntax: show clock
Example: ASUS# show clock
5.4 Miscellaneous commands
show private health: shows the environment variable, like
temperature, fan speed and voltage.
show private led: shows the three system LEDS – SYSTEM, RPS
and FAN.
show private model: shows the model name of switch.
show version: shows the hardware, boot rom and firmware version.
ping: ping remote host
show ip route: display the entries in the routing table