Asus GigaX2124 - Manual (Page 57)

45
Chapter 4 - Configuration Management
ASUS GigaX2124
Edit the following attributes as needed:
Joint Timer: Set value in centiseconds.
Leave Timer: Set value in centiseconds.
LeaveAll Timer: Set value in centiseconds.
Click OK to make the settings effective. Click Reload to refresh the
settings to current value.
Figure 45. GARP Timer
4.8.12 QoS and CoS
4.8.12.1 802.1p Priority
Eight egress queues on all switch ports. These queues can either be
configured with the Weighted Round Robin (WRR) scheduling algorithm or
configured with one queue as a strict priority queue and the other queues
for WRR. The strict priority queue must be empty before the other queues
are serviced. You can use the strict priority queue for mission-critical and
time-sensitive traffic. There are three options:
First Come First Service: The first come frame has the highest
priority
High Priority First: Packet’s priority depends on its CoS value