Asus GigaX2124 - Manual (Page 65)

53
Chapter 4 - Configuration Management
ASUS GigaX2124
Figure 55. SNMPv3 VGU Table - Views
4.9.3.2 Groups
VACM Group is used to configure the information of SNMPV3 VACM
Group.
Group Name: Enter the security group name.
Security Model: Chose the Security Model Name that the Group
belongs. Any is suitable for v1, v2, v3. USM is SNMPv3 related.
Security level: Chose the Security level Name that the Group
belongs. Only NoAuthNoPriv, AuthNopriv, AuthPriv can be chosen.
Read View Name: Chose the Read View Name that the Group
belongs. The related SNMP messages are Get,GetNext,GetBulk.
Write View Name: Chose the Write View Name that the Group
belongs. The related SNMP message is Set.
Notify View Name: Chose the Notify View Name that the Group
belongs. The related SNMP messages are Trap,Report.
Click Add when you create a new VACM group entry by the above
information. Then you will see the new added entry shows in the group
window. You can remove the existed group by selecting the entry with the
mouse, then click Remove. The Modify button updates the existed VACM
Group entries. Click OK to make the settings effective. Click Reload to
refresh the settings to current value.