Asus GigaX2124 - Manual (Page 105)

93
Chapter 5 - Command Line Interface
Show dot1x radius server ip, radius key, and radius port for 802.1X
configuration.
CLI Syntax: show dot1x radius
Example: ASUS# show dot1x radius
5.3.25 Port Security
5.3.25.1 show port security
This command used to show the port security configuration, status and
MAC addresses information.
CLI Syntax: show port-security [address] [interface IFNAME]
Example: ASUS# show port-security
ASUS# show port-security interface gi1/0/24
ASUS# show port-security address
ASUS# show port-security address gi1/0/24
5.3.25.2 clear port security
This command used to clear port security dynamic MAC addresses.
CLI Syntax: clear port-security dynamic [address MAC] | [interface
IFNAME]
Example: ASUS# clear port-security dynamic
ASUS# clear port-security dynamic 0023.1313.2313
ASUS# clear port-security dynamic interface gi1/0/24
5.3.25.3 switchport port-security
This command used to set the port security configuration, and MAC
addresses.
CLI Syntax:switchport port-security [mac-address MACADDR] |
[maximum VALUE] | [violation {protect | restrict | shutdown}] | [reup]
Example: (config)# interface gi1/0/24