Asus GigaX2124 - Manual (Page 74)

62
Chapter 4 - Configuration Management
ASUS GigaX2124
4.11.3 RADIUS
In order to use external RADIUS server, the following parameters are
required to be setup:
Authentication Primary/Secondary Server IP: The IP address of
the primary/secondary RADIUS server.
Authentication Primary/Secondary Server Port: The port number
for the primary/secondary RADIUS server is listening to.
Authentication Primary/Secondary Server Key: The key is used for
communications between GigaX and the primary/secondary RADIUS
server.
Confirm Authentication Key: Re-type the key entered above.
The VLAN of the RADIUS server connected to the switch must be
the same as the VLAN of the system management interface.
Note
Click OK to make the settings effective. Click Reload to refresh the
settings to current value.
Figure 66. RADIUS