Asus GigaX2124 - Manual (Page 104)

92
Chapter 5 - Command Line Interface
(config-if)# dot1x guest-vlan 3
5.3.22.2 dot1x port-control
Use the dot1x port-control interface configuration command on the switch
to enable manual control of the authorization state of the port. Use the no
form of this command to return to the default setting.
CLI Syntax: dot1x port-control (auto | force-authorized | force-
unauthorized)
Example: (config)# interface gi1/0/1
(config-if)# dot1x port-control force-authorized
5.3.23 Dial-in User
5.3.23.1 dot1x username password
Add user into local radius database.
CLI Syntax: dot1x user USERNAME PASSWORD VLANID
Example: (config)# dot1x user test 12345 3
5.3.23.2 show dot1x user
Show dot1x dial-in user.
CLI Syntax: show dot1x user
Example: ASUS# show dot1x user
5.3.24 RADIUS
5.3.24.1 RADIUS settings
This command sets the radius server ip, radius key, and radius port for
802.1X configuration.
CLI Syntax: dot1x radius server A.B.C.D RADIUS_KEY [PORT]
Example: (config)# dot1x radius server 192.168.1.38 123456 1812
5.3.24.2 show dot1x radius