Asus GigaX2124 - Manual (Page 102)

90
Chapter 5 - Command Line Interface
This command attaches policy map set to an interface.
CLI Syntax: policy map input POLICYMAP
Example: (config-if)# policy map input policy1
5.3.20 SNMP
5.3.20.1 show rmon statistics
Show rmon statistics IFNAME status.
CLI Syntax: show rmon statistics [IFNAME]
Example: ASUS# show rmon statistics gi1/0/1
5.3.20.2 show snmp-server community
Show snmp-server community.
CLI Syntax: show snmp-server community
Example: ASUS# show snmp-server community
5.3.20.3 snmp-server host
This command sets the SNMP host information.
CLI Syntax: snmp-server host A.B.C.D
Example: (config)# snmp-server host 192.168.8.31
5.3.21 Filter
5.3.21.1 MAC filter set
This command defines an extended MAC access list using a name, and
enter access-list configuration mode.
CLI Syntax: mac access-list extended ACLNAME
Example: (config)# mac access-list extended mac_acl_1
5.3.21.2 IP filter set
This command defines an extended/standard ip access list using a name,