Asus GigaX2124 - Manual (Page 94)

82
Chapter 5 - Command Line Interface
CLI Syntax: no mac-address-table multicast MACADDR VLANID
IFLIST
Example: (config)# no mac-address-table multicast 0100.5e11.1111 2
gi1/0/1-3
5.3.10.3 show mac-address-table multicast
User executes the command to display the Layer 2 multicast entries for
all VLANs. Use the command in privileged EXEC mode to display specific
multicast entries.
CLI Syntax: show mac-address-table multicast
Example: ASUS# show mac-address-table multicast
5.3.11 IGMP Snooping
5.3.11.1 ip igmp snooping
This command sets the IGMP snooping function enabled globally.
CLI Syntax: ip igmp snooping
Example: (config)# ip igmp snooping
5.3.11.2 interval time
This command sets the interval time for the IGMP queries sent by switch.
CLI Syntax: ip igmp snooping last-member-query-interval TIMEVALUE
Example: (config)# ip igmp snooping last-member-query-interval 100
5.3.12 DHCP Snooping
5.3.12.1 ip dhcp snooping
This command sets the DHCP snooping function enabled globally.
CLI Syntax: ip dhcp snooping
Example: (config)# ip dhcp snooping