Asus GigaX2124 - Manual (Page 98)

86
Chapter 5 - Command Line Interface
5.3.16.3 name VLANNAME
Use the command to create vlan entry with VLANNAME on the switch.
CLI Syntax: name VLANNAME
Example: (config)# vlan 2
(config-vlan)# name VLAN2
5.3.16.4 access vlan
Set access mode characteristics of all interfaces and Set Virtual LAN.
CLI Syntax: switchport access vlan <1-3000>
Example: (config)# interface gi1/0/2
(config-if)# switchport access vlan 1
5.3.16.5 allowed VLANs
Use the switchport trunk allowed vlan configuration command on the
switch to add or remove the allowed VLANs that can receive and send
traffic on this interface in tagged format when in trunking mode
CLI Syntax: switchport trunk allowed vlan (add | remove) VLANLIST
Example: (config)# interface gi1/0/2
(config-if)# switchport trunk allowed vlan add 1-10
5.3.17 GVRP
5.3.17.1 clear gvrp statistics
Use the clear gvrp statistics configuration command on the switch to clear
all the GVRP statistics information on one or all interfaces.
CLI Syntax: clear gvrp statistics [IFNAME]
Example: ASUS# clear gvrp statistics gi1/0/2
5.3.17.2 gvrp mode
This command sets the GVRP feature globally enable or disable on the
switch.