Chapter 5 - command line interface – Asus GigaX2124 User Manual

Page 85

Chapter 5 - Command Line Interface

5.3.3.2 disable

Turn off privileged mode and back to user mode.

CLI Syntax: disable

Example: ASUS# disable

5.3.3.3 Firmware upgrade

Upgrade new firmware into switch through TFTP/FTP.

CLI Syntax: archive download-sw /overwrite tftp:

URL

Example: ASUS# archive download-sw /overwrite tftp:

192.168.1.3/

firmware.img

CLI Syntax: archive download-sw /overwrite ftp:

[Username:

Password@]URL

Example: ASUS# archive download-sw /overwrite ftp:

asus@1234:192.168.1.3/firmware.img

5.3.3.4 configure terminal

After entering enable mode, use the command to enter configure mode.

CLI Syntax: configure terminal

Example: ASUS# configure terminal

5.3.3.5 end

This command let user end current mode and down to enable mode.

CLI Syntax: end

Example: ASUS# end

5.3.3.6 exit

This command let user exit current mode and down to previous mode.

CLI Syntax: exit

Example: ASUS# exit