Asus GigaX2124 - Manual (Page 46)

34
Chapter 4 - Configuration Management
ASUS GigaX2124
4.8.3 LACP
The page configures the LACP group (port trunking) and shows LACP
running information. The maximum group is 8 and up to 8 ports per group.
The first part configures LACP group.
Trunk ID: A number to identify the trunk group
Protocol: Show the state of the link aggregation group. For the page
is LACP.
Port Selection Criterion: The algorithm to distribute packets among
the ports of the link aggregation group according to source MAC
address, destination MAC address, source and destination MAC
address, source IP address, destination IP address, or source and
destination IP address.
Port: These port icons are listed the same way as on the front panel.
You have to click the icon to select the group members. The port can
be removed from the group by clicking the selected port again.
Admin Ports: Show port members the user configured
Oper Ports: Show real operation ports
Click OK to make the settings effective. Click Reload to refresh the
settings to current value.
Figure 33. LACP – mode