Asus GigaX2124 - Manual (Page 100)

88
Chapter 5 - Command Line Interface
5.3.18.4 show cos policy
This command shows the cos policy.
CLI Syntax: show cos policy
Example: ASUS# show cos policy
5.3.18.5 qos ingress bandwidth
This command used to set the Qos bandwidth informational parameter for
the incoming packets.
CLI Syntax: qos ingress bandwidth LIMITRATE
Example: (config)# interface gi1/0/2
(config-if)# qos ingress bandwidth 64
5.3.18.6 qos egress bandwidth
This command used to set the Qos bandwidth informational parameter for
the transmitting packets.
CLI Syntax: qos egress bandwidth LIMITRATE
Example: (config)# interface gi1/0/2
(config-if)# qos engress bandwidth 64
5.3.19 Policy Map
Policy Map offers the capability that user can change the priority of
incoming packets, transmitting packets and dropping packets when over-
loading.
5.3.19.1 policy-map
This command defines a policy-map set using a name, and enter policy-
map configuration mode.
CLI Syntax: policy-map POLICYMAP
Example: (config)# policy-map policy1
5.3.19.2 class