Asus GigaX2124 - Manual (Page 92)

80
Chapter 5 - Command Line Interface
5.3.7.3 show aggregation-link trunk
Show aggregation-link trunk status.
CLI Syntax: show aggregation-link group GROUPID
Example: ASUS# show aggregation-link group 1
5.3.8 LACP
5.3.8.1 lacp aggregation-link trunk
This command sets the Link Aggregation Control Protocol (LACP)
operation add/set for the trunk group ports on the switch.
CLI Syntax: lacp aggregation-link group <1-8> (add | set) IFLIST
Example: ASUS# lacp aggregation-link group1 add gi1/0/1-3
5.3.8.2 no lacp aggregation-link trunk
This command sets the Link Aggregation Control Protocol (LACP)
operation disable for the trunk group ports on the switch.
CLI Syntax: no lacp aggregation-link group <1-8>
Example: ASUS# no lacp aggregation-link group 1
5.3.8.3 lacp system-priority
This command sets the system priority for the Link Aggregation Control
Protocol (LACP) on the switch.
CLI Syntax: lacp system-priority <1-65535>
Example: (config)# lacp system-priority 20000
5.3.9 Mirroring
5.3.9.1 mirror
This command mirrors the source interface list traffic to the destination
interface. The mirror type support received traffic, Transmitted traffic, or
both.