Asus GigaX2124 - Manual (Page 87)

75
Chapter 5 - Command Line Interface
Figure 76. SYS commands
5.3.3.11 IP Address and Network Mask
Set the IP address for the switch. This IP address is used for manageable
purpose, i.e.; network applications such as, http server, SNMP server, tftp
server, ssh and telnet server of the switch are all using this IP address in
interface vlan1.
CLI Syntax: ip address A.B.C.D/M
Example: (config)# interface vlan 1
(config-if)# ip address 192.168.20.121/24
5.3.3.12 Default Gateway
Set the IP address of the default gateway. This field is necessary if the
switch network contains one or more routers.
CLI Syntax: ip route A.B.C.D/M (A.B.C.D|INTERFACE)
Example: (config)# ip route 0.0.0.0/0 192.168.1.2
5.3.3.13 reboot
Use this command to reboot the system.
CLI Syntax: reboot
Example: ASUS# reboot
5.3.3.14 reload default-config file
Use this command to copy the default-config file to replace the current one.
To make the default-config work, the switch must run reboot command.
CLI Syntax: reload default-config file
Example: ASUS# reload default-config file