Asus GigaX2124 - Manual (Page 93)

81
Chapter 5 - Command Line Interface
CLI Syntax: mirror session <1-2> source IFLIST (both | rx | tx)
mirror session <1-2> destination IFNAME
Example: (config)# mirror session 1 source gi1/0/1-4 both
(config)# mirror session 1 destination gi1/0/5
5.3.9.2 show mirror
To show current mirror features.
CLI Syntax: Show mirror session
Example: ASUS# show mirror session
5.3.9.3 no mirror
This command disables the mirror function.
CLI Syntax: no mirror session <1-2>
Example: (config)# no mirror session 1
5.3.9.4 no mirror source IFLIST
This command resets the source interfaces’ received or transmitted traffic.
CLI Syntax: no mirror session <1-2> source IFLIST
Example: (config)# no mirror session 1 source gi1/0/1-2
5.3.10 Static Multicast
5.3.10.1 mac-address-table multicast
Use the mac-address-table multicast configuration command on the switch
to add multicast static addresses to the MAC address table.
CLI Syntax: mac-address-table multicast MACADDR VLANID IFLIST
Example: (config)# mac-address-table multicast 0100.5e11.1111 2
5.3.10.2 no mac-address-table multicast
Use the no mac-address-table multicast configuration command on the
switch to remove multicast static port to the MAC address table.