GE Industrial Solutions ADVANCED SNMP WEB INTERFACE CARD - Manual (Page 14)

Modifications reserved Page 14/33
OPM_CNT_ADV_SNM_CRD_XGB_V050.doc Operating Manual ADVANCED SNMP WEB INTERFACE CARD
C. sys-location
Syntax: GE> C
Enter sys-location [The physical location of the agent]:
XXXXXXXXXXXXXXX [Enter]
Default: The physical location of the agent
Description: The physical location of the agent
D. upsName
Syntax: GE> D
Enter upsName [The administrative name of the connected UPS]:
XXXXXXXXXXXXXXX [Enter]
Default: The administrative name of the connected UPS
Description: The administrative name of the connected UPS
E. upsAttachedDev
Syntax: GE> E
Enter upsAttachedDev [The type of equipment connected to the UPS]:
XXXXXXXXXXXXXXX [Enter]
Default: The type of equipment connected to the UPS
Description: The type of equipment connected to the UPS
F. snmpport
Syntax: GE> F
Enter snmp port [161]:
XXX [Enter]
Default: [161]
Description: Specifies the SNMP plug in card’s UDP communication port number.
G. httpport
Syntax: GE> G
Enter http port [80]:
XXX [Enter]
Default: [80]
Description: Specifies the SNMP plug in card’s HTTP communication port number.
H. Telnet
server
Syntax: GE> H
Telnet server (0=off 1=on) [1]:
X [Enter]
Default: 1=on
Description: Enables (on) or disables (off) configuration via telnet.
I. Http
server
Syntax: GE> I
Http server (0=off 1=on) [1]:
X [Enter]
Default: 1=on
Description: Enables (on) or disables (off) configuration via web browser.
J. Telnet/Http
username
Syntax: GE> J
Enter new username [GE]:
XXXXX [Enter]
Default: GE
Description: Username for protects the SNMP card from unauthorised access via http or telnet session.