GE Industrial Solutions ADVANCED SNMP WEB INTERFACE CARD - Manual (Page 13)

Modifications reserved Page 13/33
OPM_CNT_ADV_SNM_CRD_XGB_V050.doc Operating Manual ADVANCED SNMP WEB INTERFACE CARD
6. traps community
Syntax: GE> 6
Enter trap 1 community [public]:
XXXXXXX [Enter]
Enter trap 2 community [public]:
XXXXXXX [Enter]
Enter trap 3 community [public]:
XXXXXXX [Enter]
Enter trap 4 community [public]:
XXXXXXX [Enter]
Default: [public] [public] [public] [public]
Description: Specifies the community names of Network Management Stations traps are sent to.
7. traps UDP port
Syntax: GE> 7
Enter trap 1 UDP port [162]:
XXXXXXX [Enter]
Enter trap 2 UDP port [162]:
XXXXXXX [Enter]
Enter trap 3 UDP port [162]:
XXXXXXX [Enter]
Enter trap 4 UDP port [162]:
XXXXXXX [Enter]
Default : [162] [162] [162] [162]
Description: Assign the UDP port-number to every trap destination previously defined.
8. get-community
Syntax: GE>8
Enter get-community [public]:
XXXXXXX [Enter]
Default: public
Description: SNMP community name (password) to read SNMP UPS information from the SNMP plug in card.
9. set-community
Syntax: GE> 9
Enter set-community [public]:
XXXXXXX [Enter]
Default: public
Description: SNMP community name (password) to write SNMP UPS information to the SNMP plug in card.
A. sys-contact
Syntax: GE> A
Enter sys-contact [The contact person for this agent]:
XXXXXXXXXXXXXXX [Enter]
Default: The contact person for this agent
Description: The contact person for this agent
B. sys-name
Syntax: GE> B
Enter sys-name [The administrative name of the agent]:
XXXXXXXXXXXXXXX [Enter]
Default: The administrative name of the agent
Description: The administrative name of the agent