Draw-Tite 30035 FIFTH WHEEL RAILS - Manual (Page 9)

Chevrolet 73 to 87 / 73 to 92 4-door (GMC) (34” Straight, with Inside Shock Absorbers)
Front
of
Vehicle
R
O
W
1
R
O
W
2
R
O
W
3
R
O
W
4
CAUTION!
Read pages 2-3 of these instructions before starting installation. Failure to do so could result in significant vehicle damage!
34-7/8” Long Box
Rear Edge of
Truck Bed
NOTE:
Must install center bolt in
one of the center holes in
each rail.
z 2006,2007,2008,2009,2010,2011,2012,2013 Cequent Performance Products, Inc.
Made in China 30035IN 9/4/13 Rev. R
Side Bracket
* Optional weld
pattern
Drivers side of 1/2 ton Chevy Shown
King Pin Center approx.. 3-1/2”
forward of Axle Center
1/4 1.5-3
1/4 2
*
DO NOT Torque to 85lb-ft
(tighten but do not crush bed sill)
1/4 2
1/4 2
*
Long bracket Short bracket
Axle Center
Bed Sill
CAUTION!
Check for obstructions before drilling. Failure to do so could result in damaged fuel or brake lines, structural members, etc.
CEQUENT PERFORMANCE PRODUCTS, INC. does its best to communicate tow vehicle manufacturer changes; however, it is
ultimately the responsibility of the installer to prevent damage due to installation.
SHEET 8 0F 21
34-7/8” Long Box
and Short Box
Measure from Rear Edge of truck
bed to rear edge of base rail.
each rail.
Check to make sure center
bolt does not interfere with
bed sill.
Front of
Vehicle