Draw-Tite 30035 FIFTH WHEEL RAILS - Manual (Page 20)

TOYOTA TUNDRA 2000 to 2006 (STANDARD CAB LONG BOX ONLY)
CAUTION!
Read pages 2-3 of these instructions before starting installation. Failure to do so could result in significant vehicle damage!
NOTE: For Toyota Tundra application, part #58197 spacer kit is required. Stack (1) 3/16” and (1) 5/16” thick
slotted spacer to avoid crushing of truck bed.
32-1/2” Long Box (Only)
Front
of
Vehicle
Rear Edge of
Truck Bed
Measure from Rear Edge of truck
R
O
W
1
R
O
W
2
R
O
W
3
R
O
W
4
NOTE:
Must install center bolt in
one of the center holes in
each rail.
Check to make sure center
z 2006,2007,2008,2009,2010,2011,2012,2013 Cequent Performance Products, Inc.
Made in China 30035IN 9/4/13 Rev. R
CAUTION!
Check for obstructions before drilling. Failure to do so could result in damaged fuel or brake lines, structural members, etc.
CEQUENT PERFORMANCE PRODUCTS, INC. does its best to communicate tow vehicle manufacturer changes; however, it is
ultimately the responsibility of the installer to prevent damage due to installation.
Side Bracket
Axle Center
1/4 1.5-3
1/4 2
*
1/4 2
1/4 2
*
* Optional weld
pattern
Drivers side shown
Measure from Rear Edge of truck
bed to rear edge of base rail.
Long bracket Short bracket
King Pin Centered approx. 1-1/4”
forward of Axle Center
SHEET 19 0F 21
bolt does not interfere with
bed sill.
Front
of
Vehicle