B&B Electronics ZXT9-MB2A-KIT - Manual - Manual (Page 41)

Document Number: ZXTxRM-5110m
Page
41
need to be observed to prevent buffer overrun. Range is 1200 to
230400 baud. Default is 9600.
Parity: Refer to section 5.3.2
Stop Bit: Refer to section 5.3.2
Flow Control: Select flow control options. Enables software flow control
(XON/XOFF) between radio modem and host. Choices are Software
Flow Control or No Flow Software Flow Control. Default is No Software
Flow Control.
Click “Update” to save changed settings. Click “Restore Defaults” to
restore the default settings. Click “Exit” to exit.
Advanced Modem Settings Tab:
The Advanced Settings Tab is used to configure Networking/Security,
Serial Interfacing, RF Interfacing, Diagnostics, Sleep (Low Power), and
Command Mode features.
Click “Update” to save changed settings. Click “Restore Defaults” to
restore the default settings. Click “Exit” to exit.
Figure 5-25 Advanced Radio Modem Settings (ZXT9-RM)