B&B Electronics ZXT9-MB2A-KIT - Manual - Manual (Page 32)

Document Number: ZXTxRM-5110m
Page
32
5.2.2 Installing USB Drivers
1. The USB Driver is installed with the manager software. You should not connect to the
USB port before installing the manager software.
2. If the found new hardware wizard appears after attaching the cable, follow the wizard.
The drivers are located in the “USB Drivers” folder on the CD.
5.3 Starting Zlinx
®
Manager Software
5.3.1 Starting the manager software
Double Click on the Zlinx
® Desktop Icon or press the start button and locate the software.
The manager software will start. Select the radio modem option on the startup screen.
Figure 5-9 Zlinx Selection Screen
The Radio Modem Configuration Screen will be displayed. This screen allows you to
configure your radio modem directly or off-line, update the firmware, return to the initial
screen, or exit.
Figure 5-10 Radio Modem Configuration Screen