B&B Electronics OP10 - Manual - Manual (Page 52)

Click “New Device”:
„ Protocol Select: There is a ModBus Slave protocol inside OP10. Based on the
proto ,
cation command, the destination
cont r
es. The names will appear in the device
list. Users can choose the new device expediently.
at of 32bit-register and the
device name. Users can edit the address list after Clicking “OK”.
col users can define address lists of communication buffer (of destination controller).
„ The size of Communication buffer: the maximal limit of communication buffer.
„ Display Format of 32Bit-Register: In the communi
rolle whether displays the low word in the front or nor.
„ Device Name: Set the name of new devic
Set communication protocol, the size of the buffer, display form
49