B&B Electronics OP10 - Manual - Manual (Page 4)

1 Summary
1.1 Function
OP10 is a Human-Machine Interface that is used with many kinds of PLC (or the other
intelligent controllers with communication ports). With OP10, both the values of the PLC inner
registers and the relays status of PLC can be monitored or changed through texts or LEDs. So the
operation of the machines or the devices is more easy and convenient.
OP10 programmable text monitor has many features:
„ The screens are made with the editor OP10-PCLINK on PC. Text including Chinese
characters can be input and the PLC address can be set. The screens are downloaded with serial
port.
„ The PLC communication protocols are downloaded to the OP10 with the data of the
screens, so the engineer don’t need to program of communication.
„ Support modbus RTU protocol.
„ Users can set 6 passwords, which have 3 levels.
„ Alarm list function. The current alarm information is displayed one by one.
„ It has 24 keys, which can be defined as function keys. There is a keyboard for numeric
input. The manipulation is simple. Some of the mechanic buttons on the controlling cabinet can be
substituted with them.
„ Various communication modes can be selected. Any of RS232, RS422 and RS485 is OK.
OP10 supports different screens in one project communicating with other devices through
different ports.
1.2 General Specification
Item Specification Remark
Power DC24V -15%~+10%
Dimension 179.5*101.5*33 mm
Operation
Temperature
0 ~55
Height Not higher than an altitudes of
2000m
Relative
Humidity
10%~95%,no dew
Environment
Pollute level Pollute level 2 IEC61131-3-3.45.2
Shake
5≤f 9 Hz 1.75mm range
shaking
9≤f≤150Hz 0.5g shaking Mechanical
Running Status
Strike 3 vertical directions 15g,11ms
Temperature -40 ~70
Height Not higher than an altitudes of
3000m Transport &
Storage
Condition Fall down
freely
With production packing 0.3m
With transport packing 1m
1