B&B Electronics OP10 - Manual - Manual (Page 35)

2.5.16 Copy the value of registers form one device to other.
Click in the toolbar to pop a Copy Register dialogue box.
Users can set 3 groups of relationships about registers transferring. Every communication
scanning cycle, OP10 will check the synchronization between source PLC and those of destination
PLC once. If source PLC has communication errors, OP10 won’t update the registers of
destination PLC. Every corresponding relationship contains one group of source addresses, 5
groups of destination addresses and can transfer 16 seriate word registers (not support double
words register transfer) at most.
Click “New” Button. An “Add Register” dialogue box will be popped.
Set the attribute of the register:
Example: Copy the content from D0-D10 of ID1 to D20-D30 of ID2.
32