B&B Electronics OP10 - Manual - Manual (Page 39)

2.5.18 Preset register
Example: SV300
Click in the toolbar to pop Preset Register dialogue box.
Some register value has its own prescriptive format, such as the “Set Frequency” register of
SV300. If we set the value of the register as 50Hz, the real value of the register is 5000. Using the
presetting, we can set the actually frequency to be the same with the value which we set. Both of
them
Set “Set frequency” register as the following picture.
are 50.
Now if users put “Register components” in the editing region. Choose “Set Frequency”
register. The picture below will be shown on the screen:
36